7 Simple Tricks To Rocking Your Ghost 2 Immobiliser

Protect Your Car From Key Long and Relay Theft With a Ghost 2 Immobiliser

The revolutionary Ghost immobiliser protects your car from key-long and relay theft. Your car won't even start if someone doesn't know your PIN code.

It also comes with Transport Mode that allows you to turn off the device temporarily, ideal for vehicle transportation and servicing. It is then activated by entering a PIN again.

No Key Fobs or Led Indicators

The Ghost 2 immobiliser is a innovation in automotive security technology and provides a solid defense against modern car theft techniques. Its undetectable installation and engine start blockage will reduce the risk of your vehicle being stolen, which can give you peace of mind and could even reduce insurance premiums.

It operates without emitting radio frequency signals, making it undetectable by traditional scanners and can't be hacked by using standard methods like key cloning and signal jamming. The device makes use of buttons in your vehicle, like those found on the steering wheel and door panels, to generate an individual PIN code which can be changed. This sequence could be as long as 20 presses. Only the vehicle owner is capable of starting the engine if the correct sequence or beacon or mobile application is used. This adds an extra layer of protection against thieves.

You can also activate an easy service mode in cases like valet parking or servicing, which require you to temporarily disable your system. This can be accomplished quickly and easily through a mobile app, meaning your vehicle remains safe while being worked on. It is easy to revert to secure mode when the task is finished and ensure that your vehicle is secure at all times.

Unlike other aftermarket immobilisers that operate with fobs and a fob, the Ghost 2 can be operated directly through the vehicles existing buttons, making it far simpler to use than traditional systems. The application can also be used as a backup key in emergency situations. This lets you drive while your security is shut off, without needing to enter a pin code.

No Radio Frequency Signals

Unlike traditional security systems that have their own dedicated remote The Ghost 2 immobiliser doesn't require any additional key fobs or keys and can be operated using existing buttons on the steering wheel or centre console. It is indetectable by thieves who employ the RF scanning technology or code grabbing, which means your car will not start for them in the event that they get your key.

The device locks the engine by using an exclusive sequence of buttons. This pin code is entered on the app, or by using the buttons on the steering column or the centre console. You can also lock the gearbox, so that your car isn't able to be driven unless you have your key or pin code. The device can also be set to Transport mode, allowing you to drive your vehicle without entering the PIN code and providing your vehicle with additional security when it's left for valet parking or service.

The Ghost 2 immobiliser was designed to be as subtle as possible, making it a great theft deterrent. This makes it a great option for those who have spent lots of money on customizing their cars or own expensive or rare vehicles. Many have stated that this is a great way to protect their cars from theft, with some even sharing stories of attempted thefts that were stopped by the device. The Ghost 2 is also very versatile. Customers report that it works both with their regular keys and with the emergency button on their vehicle, providing them with peace-of-mind when they're away from their car.

No Radio Frequency Scanners

Ghost immobilisers guard your vehicle from key cloning and theft. The system makes use of the buttons on your dashboard as well as the steering wheel to create a unique sequence of buttons that you can only recognize. Your car won't begin without this sequence. The combination of a unique disarm sequence and the absence of radio frequency signals makes the device extremely difficult to penetrate or disable.

In contrast to devices which depend on radio frequency scanning The Ghost CAN Immobiliser is completely silent and doesn't require any external signals to do its magic. It is a more secure alternative, and it can be protected if installed by an installer who is TASSA-approved (we are one of them!) ).

Because of the nature of how the Ghost immobiliser is integrated into your vehicle, it is advised to have an expert installer complete the installation. This ensures that it is seamlessly integrated into the vehicle's systems, which results in optimal performance and a considerably reduced risk of malfunction.

Professional installation is often with warranties and support to enhance the value of your purchase. This is a major protection against thieves who are less likely to attempt any attempts at bypassing the device as a result of its extensive security features and professional installation.

As well as being an excellent deterrent against thieves As well as a great deterrent to thieves, in addition to being a great deterrent for thieves, Ghost is designed to be user-friendly too. It can be programmed to automatically rearm for a set period of time after parking your car. This way, you don't need to remember your PIN code every time. It offers a Service/Valet mode when you need to leave your car to valet parking or to service. This can be enabled and disabled using simple indicator sequence.

No Wire Cutting

The Ghost 2 is non-invasive and does not require cutting of wires during installation. It connects to your vehicle's CAN data network and is equipped with a unique PIN code which prevents other people from starting your engine if they do not have a unique PIN sequence or app authorisation.

It's also quiet because it doesn't emit radio signals like other immobilisers. It is weatherproof, sealed and small enough to hide in the vehicle.

The Ghost II also has the capability to be switched into 'transport mode which enables it to be used for short durations without the need for a separate PIN. This is great for situations like loaning the car to a family member or friend or in emergencies that allow you to start your vehicle and leave quickly and safely.

When installing the Ghost II, it's important to be in a well-lit area and wear protective gear when working with tools and electrical components. A basic set of hand tools will allow you to make precise connections, and a multimeter can be used to determine electrical values and ensure that your wiring is secure. Insulation tape and cable ties can be used to secure or rejoin any exposed or cut wires during the installation process.

It's also vital to disconnect the battery prior to trying any wiring work on your vehicle. This will stop any accidental airbag deployments or electrical shocks from occurring when the battery is accidentally disconnected while the Ghost II is still connected to the vehicle's system.

Easy to Install

The Ghost immobiliser, a unique device from the next generation, works by connecting directly to your vehicle's CAN Data Network. It utilizes a unique pin code to stop it from beginning. This makes it much harder to crack than standard key fobs or alarm systems and offers superior protection from key cloning hacking, as well as relay attacks.

The device can be hidden inside your vehicle, and it uses the buttons that are already present on your dashboard and steering wheel to generate an sequence that only you can recognize. This stops thieves from being able to make use of a duplicate key to start your vehicle. It can also stop them from using the diagnostic tool which is focused on hacking the OBD.

Installation is simple and does not require cutting wires.  thekeylab.co.uk  is connected to the vehicle's CAN bus using a constant 12V supply identified and a grounding connector. A multimeter is required to determine the proper wires. Hand tools of a basic nature are sufficient for installation. Insulation tape or heat shrink tubing is recommended to shield the connections and cable ties are a good option to keep the wiring tidy and organized.

Once installed, the unit goes into a learning mode that records your specific buttons or sequences in order to create your own unique pin code. The information is stored in the CAN data network, making it virtually impossible for anyone else to replicate your sequence and start your vehicle.

Transport Mode is a function that can be utilized in an emergency if you forget your PIN code, decide to sell your vehicle or the button stops working. This will disable the Ghost System completely, but it will reactivate itself automatically when you exceed 31mph for longer than 15 minutes or enter your PIN Code. This is great for those who regularly rent out their vehicles on services such as Turo or ZipCar.